10
Mounting the Energizer
Do not remove the lid
STEP 1:
The energizer cardboard box
packaging has a drilling template printed on
the bottom. Use this template and drill 4 x
8mm holes in the wall for mounting the unit.
Four nail-in anchors are supplied with the unit.
Insert the plastic sleeve of the nail in anchor
into the wall then hammer the screw in with a
screwdriver and hammer. Leave a gap slightly
more than the thickness of the casing between
screw heads and wall. Position the casing so
that the screws go through the slots provided
then drop it into position. If necessary, tighten
the top 2 screws slightly more to secure the
casing. The bottom two screws will slot into
the casing for stability.
STEP 2:
Connect the Earth terminal of the energizer to
3 or more Earth spikes.
STEP 3:
Connect the HV output terminal to the
lightning diverter/Fence.
STEP 4:
Connect the DC terminals to the power supply
unit or to a battery. Red terminal is positive
and black terminal is negative.
Note:
Energizer to be mounted vertically
against a flat surface, in a well-ventilated area.
Avoid prolonged exposure to direct sunlight.
Mounting Slots
