COD
.: EN-510007
12
If this pause is not respected, the
refrigeration system may be damaged or
it may need a very long time before
restarting.
If a power failure has occurred or the
p l u g h a s b e e n a c c i d e n t a l l y
disconnected. Operation stops.
Wait 10 minutes before restarting the
machine.
Check that the machine is positioned
correctly with the vents free from any
obstruction.
Check that the ventilation works, making
sure that the air comes out of the front
grid.
A certain level of noise falls within the
normal operating specifications.
However, if it becomes excessive,
contact an authorised Service Centre.
The machine is noisy.
The combination of ingredients poured
in at a temperature below +5°C and pre-
cooling phase may prevent the blade
from starting. Turn off the machine for 10
minutes. Then restart it, skipping the
pre-cooling phase.
PROBLEM:
The blade does not turn
Check that the blade is securely
attached to the shaft and locked with the
specific fixing knob (C).
POSSIBLE CAUSES:
Check that there are no obstructions
that prevent blade rotation (including
any bowl deformation).
English
CERTIFIED
ISO 9001:2015
www.nemox.com
Via E. Mattei, N° 14 - 25026 Pontevico
Brescia - ITALY
NEMOX International S.r.l.
