Nemesis UV-C Tower User Manual_V1
_________________________________________________________________________________________
_________________________________________________________________________________________
8
Using the Nemesis UV-C Tower
Step 1: Unpack your unit and remove the slipcover.
Step 2: Determine the size of your space and place the unit as close to the center of that space
as possible and make note of time needed for proper disinfection by referring to the
disinfection chart on the following page.
Step 3: Plug in the included power cable and switch on the power switch on top of the base.
Step 4: Place included placards on entry doors or around space to warn of UVC disinfection in
progress.
Step 5: Once you are clear of the unit use either your key fob or web-based application to start
the system.
Step 6: You will hear an alert running as soon as the system starts. The disinfection time starts 1
minute from activation. Then run appropriate amount time for your space. If you are using the
web app you can set a timer or schedule for disinfection duration.
Step 7: Deactivate the unit at the completion of pre-determined disinfection time before
entering the space to remove the tower.
