3
PERFORMANCE INSURANCE
PRODUCTION TOOLS
•
SHOW CONTROL
•
BACKUP SOLUTIONS
www.nemesis-research.com
OSC Listen Port
53500
In order to change settings navigate to the device's IP address (default: 192.168.1.253) on the
network using a web browser or use its network name (default: OSCA-I8) and navigate to the
“Network page”
In order for changes to take effect press save and then restart (Please note if you have changed
IP address or device name the page may not refresh, and you will need to open a new tab in your
browser with the new user settings).
Destination Settings
On the Destinations page, you can specify and name destinations (a maximum of 8 when in
advanced mode and 2 when in a preset) which will be stored in the device's memory. Please
specify the IP address and OSC listen to port of the receiving device(s).
Input Settings
Each input can send up to two messages (Command), with each one sent to one of eight
destinations. (to send the same command to both destinations send identical command to each
location)
The device comes with three pre-sets built-in with predefined commands for CSC and Qlab and
OSCA-O4.
All commands in these pre-sets will be sent to Destination 1 and 2 (if specified on the
destinations page)
Qlab Preset
Button
Function
Command
1
Go
/go
2
Stop
/panic
3
Previous
/playhead/previous
4
Next
/playhead/next
5
Not used
When using this pre-set it may be necessary to configure QLab to allow OSC connection access
without a passcode.
CSC Preset
Button
Function
Message (Command)
1
Go
/cuelist/go
2
Stop
/cuelist/stop
3
Previous
/cuelist/prev
4
Next
/cuelist/next
5
Not used
OSCA-O4 Preset
Button
Function
Address
Integer Argument
1
Relay 1 ON
/relay/1
1
2
Relay 2 ON
/relay/2
1
3
Relay 3 ON
/relay/3
1
