Nemesis Audio
3
GPI 9-11:
Flashes briefly when a GPI switch contact is closed on the 3 XLR GPI Input connectors 9-11.
ER:
Illuminates when an error condition is detected inside the CCS-2. The exact error(s) can be
shown on the front panel by selecting
Menu -> Show Current Error(s)
. Common errors would include
a faulty power supply or low voltage condition.
FRONT SWITCH A:
Illuminated large front panel user button. Commonly configured to switch the
computer system to the “Main” or “A” system.
FRONT SWITCH B:
Illuminated large front panel user button. Commonly configured to switch the
computer system to the “Backup” or “B” s
ystem.
Rear Panel Connections
Mains Input:
Powercon style mains input connector. The CCS-2 is fitted with dual-redundant
switched mode power supply modules, and can be connected to mains supply voltages from 115V to
240V. Both supplies are internally fused and a fault condition in either module will illuminate the
ER
front panel LED.
VIDEO OUT 1 & 2:
2 DVI-I style connectors for accessing the switched output of the video boards.
The CCS-2 contains 2 video switching boards for dual screen operation. Both DVI and VGA signals are
present on this connector, and suitable connectors/adaptors should be used to access the desired
signal. Note that there is no conversion inside the CCS-2 between DVI and VGA
–
if a signal is
connected to the Video Input as VGA, only the VGA output pins will have signal at this connector,
and vice-versa. Care should be taken to ensure the correct adaptors are in place.
VIDEO IN A 1 & 2:
2 DVI-I style connectors for connecting a computer video source to each of the
video boards. The source can be DVI or VGA as described above by using suitable adaptors or cables.
Most commonly used for connecting a “Main” computer
video source.
VIDEO IN B 1 & 2:
2 DVI-I style connectors for connecting a computer video source to each of the
video boards. The source can be DVI or VGA as described above by using suitable adaptors or cables.
Most commonly used for connecting a “Backup” computer
video source.
KEYB/MOUSE:
A USB-A dual socket for connecting a console keyboard and mouse to the USB
switching section of the CCS-2. The signals are switched between computer systems as defined by
the current preset configuration.
CPU A:
A USB-B connector for connecting to one of the host computer systems, most commonly the
“Main” machine. This socket is the output of the internal USB hub, and so contains signals from
Keyboard and Mouse (when switched) and the internal USB MIDI device.
Summary of Contents for CCS-2
Page 13: ...Nemesis Audio 13 ...