Page | 9
P: 419.542.7751 F: 419.542.6690 800.782.761 nemcofoodequip.com
49234A
Installation Guide
Always ensure that the glass surface of the range is mounted FLUSH with the counter top. The exposed
edge of the glass is fragile and can be easily chipped or broken by side impact.
If flush mounting is not feasible, you can purchase the optional Stainless Steel Trim Ring this allows you
make a simple cut-out in the counter top, and the Trim Ring supports the unit and protects the glass
edge from damage.
With either mounting method, seal around the unit (and Trim Ring) with silicone caulking to keep liquids
from penetrating and getting below the surface.
If the units are mounted in a closed cabinet, you must ensure that there is adequate air flow for the
units. Each unit draws in cooling air from the back, and exhausts warm air from the front. In a closed
cabinet you must provide adequate openings for both the intake and the exhaust air.
Drawing for the control panel cut-out.
