1.
On/Off Switch
– This gives the user the ability to turn the appliance On or Off.
Note: this does NOT turn
power off to every internal component.
2.
Adjustable Legs
– Gives the installer the ability to level the press as needed.
3.
Sandwich Press Cavity
– The cavity is constructed with stainless steel and a nonstick coating.
4.
Heating Platens
– These can be grooved or flat heating surfaces. The upper platen is able to float to allow
for even surface contact for varying height of food items.
5.
Steam Vent
- Allows steam to escape the cavity.
6.
Specification Plate
– This plate shows the ratings for this device along with, model & serial number, and
NEMCO contact information.
7.
USB Port
– This port is used to load menu files with an approved USB flash drive.
8.
Cover, Steam Vent Cleanout
– This cover is removable with standard tools to allow for cleaning inside the
steam vent.
9.
Panels, Side Access
– These panels are located on the RH and LH side of the lower enclosure to give
service technicians access.
10.
Microwave Choke Assembly
– This assembly contains the lower heating platen and is removable to allow
access to the lower enclosure.
Note: If this is removed, then its location will need to be set correctly to
ensure microwave leakage is within safe ranges.
11.
Panel, rear Access
– This panel gives a service technician access to the rear enclosure.
12.
Power Cord
– Is located at the back of the lower enclosure.
13.
Cooling Fans
– These are located behind the top enclosure filter and need to be kept clear of obstructions
to ensure the magnetrons stay cool.
14.
Release, Upper Heater Platen
– This is turned a quarter turn to drop the upper heater platen down for
cleaning and service.
