DOOR INTERLOCK SWITCH ADJUSTMENT (P. 2)
1.
Disconnect the press from the power supply.
2.
Loosen (2) screws on each of the switch brackets.
3.
Place a ½” spacer on the front ledge of the press and pull down the lid.
4.
With the lid pulled down push the bottom switch bracket in towards the magnet disc until it is
engaged. After the switch is engaged, tighten down both screws.
5.
Replace the ½” spacer with a ¼” spacer.
6.
Pull the lid back down and push the top switch bracket in until both switches are engaged.
7.
Once the switches are engaged, tighten down the screws on the switch bracket.
MONITOR SWITCH
PRIMARY SWITCH
SECONDARY SWITCH
