Nelson NWG410, Manual

Page: 14 / 28

‐ NWG410 ‐
14
6.4 Modifiable parameters
This table lists the model choice or cycle and temperature option parameters.
F/
M ID Description Default Min. Max Notes
M P0 Appliance Type 1 1 4 Construction version
Do not modify
F P1 Appliance Model Do not modify
M P2 Boiler temperature 80C 60C 90C Step 1 degree
WARNING: The actual
boiler temperature
depends on whether the
connection is single ‐ phase
or three ‐ phase.
With three ‐ phase
connection, do not set
more than 85°
M P3 Tank temperature 58C 40C 65C Step 1 degree
M P4 Thermostop option 0 0 1 0=off 1=on
M P5 Soft Start option 1 0 1 0=off 1=on
M P6 Boiler temperature offset 0 ‐ 20 +20 Real=mOffset
M P7 Tank temperature offset 4 ‐ 20 +20 Real=mOffset
M P8 Real temperature display 1 0 1 0= filtered, 1= real
F P9 Tank probe type 1 0 1 Do not modify
Note for P6 and P7: negative numbers are indicated by illumination of both decimal points (e.g.: ‐ 12
“1.2.”)

“1.2.”)
6.5 Alarm trigger time thresholds
This table lists all the safety device trigger time thresholds.
F/
M
ID Description Default
Min
.
Max
Notes
F A0
F A1 Boiler max. heating time 20 min 5 60 Step = 1 min
F A2 Tank max. heating time 50 min 5 60 Not active with PL ON
F A3 Maximum water intake time 5 min 1 20 Step = 1 min
F A4 Maximum emptying wait time 1 min 1 2 Step = 1 min