INSTALLATION INSTRUCTIONS
6. Place the bolt cap bases on the T-bolts and
proceed to secure the toilet into place by fas-
tening the washers and nuts to the bolt caps
and T-bolts.
7. Place access cover over access opening
and fasten to the toilet.
™
CONCEALED MOUNT WITH SIDE ACCESS INSTALLATION INSTRUCTIONS
Sealant
Apply Silicone Sealant
8. Apply a small bead of silicone sealant
where toilet base meets finish floor.
Wipe and clean any excess sealant immedi-
ately.
9. Connect water supply.
•
Connect the shut-off valve to the supply pipe.
Gradually open the valve and check for leaks.
•
Flush several times to test for leaks and continue
to do so periodically for the first few days of usage.
**NOTE
: Do not overtighten nuts. Porcelain is
fragile and could possibly crack if nuts are over-
tightened.
**
DURA
NBKD-50A
