Neilsen CT4000, Original Instruction

Page: 6 / 12

4
4. Store idle tools out of the reach of children and do not allow persons unfamiliar
with the tool or these instructions to operate the tool. Tools are dangerous in the
hands of untrained users.
5. Maintain tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the tool’s operation. If damaged,
have the tool repaired before use. Many accidents are caused by poorly
maintained tools.
6. Have your tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the tool is maintained.
SAFETY WARNINGS
1. Connect to GFCI outlet only.
2.Do not allow children to operate the fan. Keep children and pets away from the
area of operation.
3. Keep the fan at least 1 meter (3 feet) away from buildings and other equipment
during operation. Keep flammable materials away, and dot not place anything on
the fan while it is running.
4. Do not use without guard in place.
5. To reduce the risk of fire or electric shock, do not use this fan blower with any
Solid-state speed control device.
6. Do not reposition the fan while in use.
7. Unplug after use.
8. Inspect before use; do not use if parts loose or damaged.
9. Keep inlet and outlet clear during use.
10. Maintain labels and nameplates on the tool. These carry important safety
information.
11. Avoid unintentional starting. Prepare to begin work before turning on the tool.
12. People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure. In addition, people with
pacemakers should:
•
Avoid operating alone.
•
Do not use with power switch locked on.
•
Properly maintain and inspect to avoid electrical shock.
•
Properly ground power cord. Ground Fault Circuit Interrupter (GFCI) should