![background image](http://html1.mh-extra.com/html/neilsen/ct3320/ct3320_instruction-manual_3903865010.webp)
8
b. Detach the air supply.
c. change the Mode Switch to setting.
d. Disengage the pusher by pulling it back slightly to disengage fastener
strip, press and hold pusher Lever, and slide pusher to front of Magazine.
e. Empty the Magazine.
f. Attempt to discharge the tool into a piece of scrap wood to ensure that it is
disconnected and is incapable of driving any fasteners.
g. Release the Trigger again.
h. Clean and oil the Drive Guide and Magazine. Clean external surfaces with
clean, dry cloth.
i. Store indoors out of children’s reach.
Note:
(1) Check the tool carefully to make sure that all the fitting pans and fastening
parts are tight before operating the Air strip Nailer.
(2) Do not use the overlapped nails as the deformed nails may result in injury.
(3) Invoid operating in the empty nail condition as it may make the tool fatigue to
be damaged.
(4) Fobid to depress the trigger and take the tool in connection with the
compressed air to go around.
(5) Turn off air source when not in use.
(6) Do not allowed to have the remainder-nail in magazine after finishing work.
Summary of Contents for CT3320
