pacemaker interference or pacemaker failure.
11. The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
3. SETUP - BEFORE USE
• Thread the Flexible Metal “Gooseneck”
Fluid Outlet Tube onto the Pump Outlet
Fitting (Fig A).
• Place the Parts Cleaning Tray over the
ledges on the walls of the tub. Make sure
the Nozzle of the Flexible Metal “Gooseneck”
Fluid Outlet Tube is shaped to be facing in
and downward toward the center of the Tub
(Fig B).
• Fill unit with suitable, water-based degreasing
solution suffi ciently to cover the entire Pump
(approx. 3.5 gallons) (Fig C).
Important Notes:
- Follow degreasing solution mixing, usage
and safety label instructions carefully before
using.
- Be sure the cleaning solution level fully
covers the Pump or it will not function properly.
• Plug power cord into an approved, grounded
and GFI equipped AC 230V/50Hz.
• Turn Power Switch to the “On” position. The
Parts Washer is now ready for use.
