![background image](http://html1.mh-extra.com/html/neilsen/ct2437/ct2437_owners-manual_3941682009.webp)
8
DISCHARGE HOSE INSTALLATION
It is best to use a short, large-diameter hose, because that will reduce fluid
friction and improve pump output.
Tighten the hose clamp securely to prevent the discharge hose from
disconnecting under pressure.
PRIMING THE PUMP
Before starting the engine, remove the filler cap from the pump chamber, and
completely fill the pump chamber with water. Reinstall the filler cap, and tighten it
securely.
NOTICE
Operating the pump dry will destroy the pump seal. If the pump has been
operated dry, stop the engine immediately, and allow the pump to cool before
priming.
Summary of Contents for CT2437
Page 4: ...3 CONTROLS FEATURES COMPONENT CONTROL LOCATION...
Page 24: ...23...
Page 25: ...24...
Page 26: ...25...