Neilsen CT2378, Instruction Manual

Page: 7 / 8

BATTERY REPLACEMENT
Flashing of digits shows a flat battery.Take off the battery cover in the direction
shown by the arrow and replace the battery (positive side facing out).
● BATTERY REPLACEMENT
Take off the battery cover in the direction shown by the arrow and replace the battery (positive
side facing out).
6. TROUBLE SHOOTING
Trouble Cause Remedy
The display can’t count. Circuit accident Put out battery and reset it in after
30sec.
Only display 000.00 or
IN 00.00
Both function buttons
and slider’s signal end
short out.
Remove the cover, put button’s spring in
idea condition
Function buttons non
active
Spring out of shape
caused by violent
pressing buttons
Ditto
Reading error for full
length is
≤0.1mm
Dirt get into sensor. Remove the cover and slider assembly,
jet sensor’s face with clean pressure air
(≤51kg/cm²), clear it with few petrol for
dirt preventing
LCD screen no display 1) Battery hasn’t
good contact.
2) Battery voltage is
under 1.1V
1) Remove the cover.keep good
contact for battery
2) Replace battery
7. DISPOSAL
At the end of the machine's working life, or when it can no longer be repaired,
ensure that it is disposed of according to national regulations.
Contact your local authority for details of collection schemes in your area.
In all circumstances:
Do not dispose of this tool with domestic waste.
Do not incinerate.