2
1.SAFETY INSTRUCTIONS
WARNING
– When using tools, basic precautions should always be followed,
including the following:
General
To reduce the risks of electric shock, fire, and injury to persons, read all
the instructions before using the tool.
Work area
a. Keep the work area clean and well lighted.
Cluttered benches and dark
areas increase the risks of electric shock, fire, and injury to persons.
b. Do not operate the Air Angle Die Grinder in explosive atmospheres,
such as in the presence of flammable liquids, gases, or dust.
The Air
Angle Die Grinder is able to create sparks resulting in the ignition of the dust
or fumes.
c.Keep by standers, children, and visitors away while operating the Air
Angle Die Grinder.
Distractions are able to result in the loss of control of the
tool.
Personal safety
a. Stay alert. Watch what you are doing and use common sense when
operating the tool. Do not use the tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating the tool
increases the risk of injury to persons.
b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair increases the risk of injury to persons as a result of being
caught in moving parts.
c. Avoid unintentional starting. Be sure the switch is off before connecting to
the air supply. Do not carry the Air Angle Die Grinder with your finger on the
switch or connect the tool to the air supply with the switch on.
d. Remove adjusting keys and wrenches before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool increases the risk of
personal injury.
e. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool in unexpected
situations.
f. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat
must be used for the applicable conditions. Wear heavy-duty work gloves
during use.
g. Always wear eye protection. Wear ANSI-approved safety goggles.
h. Always wear hearing protection when using the tool. Prolonged exposure to
