![background image](http://html1.mh-extra.com/html/neilsen/ct2204/ct2204_assembly-and-operating-instructions-manual_3896872005.webp)
5
5.
Slip Inner Axle Bushing (#37) onto the right side of the axle, pushing the Inner Axle Bushing
into the Outer Axle Bushing until tight. Attach Wheel (#36) to the right side of the axle by inserting
a M5 x 45 bolt (#47) and fastening with Lock Nut M5 (#44). Attach Axle End Cap (#35) by tapping
with a wooden or rubber mallet.
b) Slip Inner Axle Bushing (#37) onto the left side of the axle, pushing the Inner Axle Bushing
into the Outer Axle Bushing until tight. Push the Wheel onto the axle. Insert nylon washers
(
#52
)
to the two sides of the wheel, then insert Flat Washer Ø16 (#34) and attach Axle End Cap (#35)
by tapping with a wooden or rubber mallet. NOTE: The nuts and bolts do not have to be
completely tightened yet.
Note: Insert the Inner axle
bushing into the outer axle
bushing and make sure they
are tight.
5