![background image](http://html1.mh-extra.com/html/neilsen/ct2204/ct2204_assembly-and-operating-instructions-manual_3896872004.webp)
4
ASSEMBLY INSTRUCTION
1.
Turn Hopper (#16) upside down and attach Frame (#30) using four screws ST6.3 x 40 (#43).
2.
a) Slide the Impeller (#42) onto the spindle of the Gear Box Assembly (#39).
b) Insert Screw M4 x20 (#41) through the Impeller and the top of the gear box spindle.
3.
a) Find the two Wheel Assembly Frames (#20).
b) Insert M6 x 60 bolt (#32) through the right hand Wheel Assembly Frame (#20) and into the
Hopper Frame Assembly (#30). Secure with Lock Nut M6 (#24). Repeat on left side. NOTE: The
nuts and bolts do not have to be completely tightened yet.
4.
a)
Attach one end of each Frame Brace (#31) to the outside of the Hopper Frame Assembly
(#30) using bolt M6 x 35 (#33) and M6 lock nut (#24).
b) Push a M6 x35 bolt (#33) through the first hole above the axle in right hand Wheel
Assembly Frame (#20). Pass bolt through the Frame Brace (#31) and into the end of the Cross
Brace (#45). Repeat with the left side. NOTE: The nuts and bolts do not have to be completely
tightened yet.