2
COMPONENTS
1.Cover
2.Off Switch
3.On Switch
4.Water scale
5.Neon light
6.2 Cups
INSTRUCTIONS
1.Remove the cups from the kettle.
2.Check whether the electrical voltage that you intend to use is the same as
that of the machine. Details are to be found on the label on the base.
3.In pouring water into the kettle, the water level must be kept within the range
of the maximum and minimum water levels set by the scale
④
(as
indicated in the picture).
4.Place the kettle base firmly on the stand, insert the plug into the socket,
switch it on, and the water will start to be heated up when the indicative light
on
⑤
(as indicated in the picture).
5.When the water boiling the switch will automatically bounce up, the
indicative light will go out, and the kettle will automatically cut off the
electricity. If the water in the kettle is to be re-boiled, one should wait a few
minutes until the contact of the automatic device if restored (as indicated
in the picture).
Notes: make sure that there is water in the kettle when it is plugged in.
CAUTIONS
1.This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
2.Children should be supervised to ensure that they do not play with the
