ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and unplugged before carrying out
any work on the tool.
Installing or remove bit
1. Pointed Chisel
2. Flat Chisel
To install the bit, follow either procedure (1) or (2) described below.
Pivot the tool retainer back and slightly downward(2)
. Insert the bit into the tool holder as far as it will
go(1)..
To securely retain the bit , return the tool retainer to its original position.
CAUTION:
Always assure that the bit is securely retained by attempting to pull the bit out
of the tool holder after completing the above procedure.
OPERATIN
Chipping/Scaling/Demolitio
n
Hold the tool firmly with both hands. Turn the tool on and apply slight
pressure on the tool so that the tool will not bounce around, uncontrolled.
Pressing very hard on the tool will not increase the efficiency.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched offand unplugged before
attempting to perform inspection or maintenance.