EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the design and construction of the following machine, in the
form supplied by us, comply with the requirements of the appropriate EC
directives.
Product description: 230V Demolition hammer 110V Demolition hammer
Model: CT1763
Model: CT1764
●EC-Machinery Directive 2006/42/EC
●EC-Directive on electromagnetic compatibility(EMC)2004/108/EC
CANNON TOOLS LTD
sign
Gurcharan Tony Singh Sanghera
2015-11-10
Important: carefully read the instructions in this manual as well as
the general safety instructions before using this tool.
Keep these manuals for further
reference.
Accessories:
1PC point chisel
1PC flat chisel
1PC Oil pot
1PC Wrench
3PC Hex Wrench
1pair carbon brush
The tool should be connected to a power source connected to earth.
If your installation needs an extension, make sure it is equipped with an earth
plug.
Wearing of protection goggles advised
Wearing of protection against noise
advised
Wearing of protective shoes advised
Wearing of respiratory protection advised
This tool is designed to break, scale, drive…concrete or similar materials. For
example the installation of tubes, cables, washroom facilitles of draining, and
other civil engineering works.
1) RECOMMENDATIONS
1. Wear protection equipment (goggles, shoes, glass, gloves ,etc.), avoid
wearing jewellery, attach long hair and wear
close-fitting clothing.
2. Unplug your tool from the mains when you are not using it ,when
changing tools or for maintenance.
3. Work in a clean and uncluttered workspace. Your work area should be
correctly lit.
4. Store the tool in a dry place, far from sources of heat or of dangerous
vapors (ideal:10 to 15
℃
). Do not operate your tool near explosive
or inflammable materials.
5. Work with tools in good condition and adapted to the task to
undertake. This equipment should be used as such and should not be
overloaded. The tool should always be used with its additional
handle(B) and firmly held with both hands.
6. Before each use, check the oil level, the tightening of screws, the
correct mouthing of the drive spindle.
7. Make sure of not driving into live parts or gas or water pipes, etc. You