operation.
2.AFTER EACH USE, re-wind the hose onto the reel and wipe the Hose Reel
clean with a dry cloth.
HOSE REPLACEMENT
1.Remove the Hose Stopper from the hose and set aside.
2.Pull out the old Hose and securely lock the Hose Reel.
3.Disconnect the old hose from the swivel joint and remove the hose.
4.Run the new hose through the Guide Roller and through the opening in the
drum flange.
5.Use thread seal tape on the hose fitting threads and screw the fitting onto the
swivel and tighten.
6.Attach the Hose Stopper on the end of the Hose near the Outlet fitting.
7.Carefully release the Drum Latch and allow the Hose to wind onto the reel,
evenly
distributing the Hose across the Reel.
WARNING
•
Internal spring is not user serviceable or user-replaceable.
