3
failure and/or personal injury.
•WARNING! DO NOT
drill any materials containing asbestos.
•DO NOT
carry the drill by the hose, or yank the hose from the air supply.
•DO NOT
force, or apply heavy pressure to the drill; let the tool do the work.
•DO NOT
place air line attachments close to your face and do not point at other
people or animals.
•DO NOT
operate drill when you are tired or under the influence of alcohol, drugs
or intoxicating medication.
•DO NOT
use drill where there are flammable liquids, solids or gases such as
paint solvents and including waste wiping or cleaning rags etc.
•DO NOT
carry the drill with your finger on the trigger.
•DO NOT
direct air from the air line at yourself or others.
•
When not in use disconnect from air supply and store in a safe, dry, childproof
location.
2. INSTRUCTION & SPECIFICATION
Reverse valve situated for easy access.
Air inlet screen prevents solid matter from entering the tool.
Designed for all types of drilling screw driving honing and reaming operations.
Max. speed: 1800/min
Max air pressure: 6.3bar
Avg. air consumption: 4cfm
Air inlet :1/4"
Max. chuck size: 3/8"
Overall dimension:180mm x 140mm x 42mm
Net weight(without accessories):1.04kg
3. PREPARING DRILL FOR USE
3.1. Air Supply
Recommended hook-up procedure is shown in fig 1.
3.1.1. Ensure tool air valve (or trigger) is in the "off" position before connecting to
the air supply.
3.1.2. You will require an air pressure of 90psi, and an air flow according to
specification.
3.1.3.
WARNING!
Ensure the air supply is clean and does not exceed 90psi while
operating the tool. Too high an air pressure and/or unclean air will shorten
the product life due to excessive wear, and may be dangerous causing
damage and/or personal injury.
3.1.4. Drain the air tank daily. Water in the air line will damage the tool.
3.1.5. Clean air inlet filter weekly.