8
USER-MAINTENANCE INSTRUCTIONS
procedures not specifically explained in this manual must be performed only by a qualified
technician.
WARNING!
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool,
and release the throttle and/or turn the switch to its off position before performing any
inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the
problem corrected before further use.
TO PREVENT SEROUS INJURY FROM EXPLOSION:
Lubricate the tool only with specified lubricants. Lubricate the air inlet using only pneumatic tool
oil. Lubricate the internal mechanism using only white lithium grease.
Other lubricants may damage the mechanism and may be highly flammable, causing an
explosion.
CLEANING, MAINTENANCE, AND LUBRICATION
Note: These procedures are in addition to the regular checks and maintenance explained as
part of the regular operation of the air-operated tool.
1. BEFORE EAcH USE, inspect the general condition of the tool. Check for:
•
loose hardware or housing,
•
misalignment or binding of moving parts,
•
cracked or broken parts, and
•
any other condition that may affect its safe operation.
2. Daily - Air Supply Maintenance:
Every day, maintain the air supply according to the component manufacturers' instructions.
Maintain the lubricator's oil level.
Drain the moisture filter regularly.
Performing routine air supply maintenance will allow the tool to operate more safely and will
also reduce wear on the tool.
3. Weekly - Grease Lubrication:
Lubricate the internal mechanism of the tool, using white lithium grease through the grease
fittings.
4. Quarterly (every 3 months)
– Tool Disassembly, cleaning, and Inspection:
Have the internal mechanism cleaned, inspected, and lubricated by a qualified technician.
If the vanes need replacement, replace them all as a set.
