![background image](http://html1.mh-extra.com/html/neilsen/ct0700/ct0700_instruction-manual_717861013.webp)
When drilling metals, use light oil on the drill
bit to keep it from overheating. The oil will
prolong the life of the drill bit and improve the
drill cutting action. If the bit jams in the
workpiece or if the drill stalls, release the
trigger switch immediately. Remove the bit
from the workpiece and determine the reason
for jamming.
GENERAL
When servicing, use only identical
replacement parts. Use of any other part
may create a hazard or cause product
damage.
DO NOT use solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloth to remove dirt, dust, oil,
grease etc.
Do not at any time allow brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. to come in contact
with plastic parts. They contain chemicals
that can damage, weaken or destroy
plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool as well as the
workpiece.
DO NOT attempt to modify tools or create
accessories not recommended. Any such
alteration or modification is misuse and
could result in a hazardous condition
leading to possible serious injury. It will
also void the warranty.
LUBRICATION
All of the bearings in these electric tools are
lubricated with a sufficient amount of high-
grade lubricant for the life of the unit under
normal conditions. Therefore, no further
lubrication is required.
13
WARNING
!
WARNING
!
WARNING
!
MAINTENANCE
ASSEMBLY & OPERATION
Summary of Contents for CT0700
Page 9: ...CARTON CONTENTS 9 Model 0700 CT0701 Shown ...
Page 14: ...PARTS DIAGRAM 14 ...
Page 16: ......