![background image](http://html1.mh-extra.com/html/neilsen/ct0679/ct0679_original-instructions-manual_3882638003.webp)
3
GENERAL SAFETY INSTRUCTIONS
Important!
When using equipment, a few safety precautions must be observed to avoid injuries and
damage. Please read the complete operating manual with due care. Keep this manual in a safe
place, so that the information is available at all times. If you give the equipment to any other
person, give them these operating instructions as well. We accept no liability for damage or
accidents which arise due to non-observance of these instructions and the safety information
herein.
SYMBOLS
In this manual and/or on the machine the following symbols are used:
1. Always wear safety equipment; goggles, face mask, respiratory equipment, ear protection.
2. Always ensure the tool is switched off/the trigger is not depressed before connecting to
the air supply.
3. Disconnect the tool from the air supply before altering the chuck, and before servicing.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid
internal corrosion and possible failure.
5. Do not wear watches, rings, bracelets or loose clothing when using air tools.
6. Use only lightweight coil hoses from the tool to the compressor coupling.
7. Do not overload the tool. Allow the tool to operate at its optimum speed for maximum
efficiency.
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Wear hearing protection.
Wear safety goggles.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health
and the health of bystanders. Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust
extraction during use.
Wear gloves.