background image

7

 

 

NOT force the machine, let the machine to the work. This will reduce the wear 

on the machine and cutter increase its efficiency and operating life. 

 

Do not use this product with any attachment designed for mixing mortar, 

concrete, or plaster, or for any other type of mixing operation. 

 

ADDITIONAL SAFETY RULES CHARERS 

1.  Before using the charger, read all the instructions and cautionary 

markings on the charger and battery pack as well as the instruction on 

using the battery pack. 

2.  Only charger your batteries indoors as the charger is designed for indoor 

use only. 

3.  Danger! If the battery pack is cracked or damaged in any other way, do 

not insert it in the charger. There is a danger of electric shock or 

electrocution. 

4.  WARNING! Do not allow any liquid to come into contact with the charger. 

There is a danger of electric shock. 

5.  The charger and battery pack supplied with it are specifically designed to 

work together. Do not attempt to charge the battery pack with any other 

charger than the one supplied. 

6.  Do not pull on the power cord to disconnect it from the mains supply 

socket. 

7.  Do not use the charger if it has been subjected to a heavy knock, dropped 

or otherwise damaged in any way. 

8.  Do not disassemble the charger. Incorrect re-assembly may result in the 

risk of fire, electric shock or electrocution. 

9.  To reduce the risk of an electric shock, unplug the charger from the power 

supply before attempting to clean it. Removing the battery pack alone 

does not reduce the risk. 

 

ADDITIONAL SAFETY RULES FOR THE BATTERY PACK 

1.  The battery pack for this tool has been shipped in a low charge condition. 

You should charge the battery pack fully before use. 

2.  Do not incinerate the battery pack even if it is seriously damaged or can 

no longer hold a charge. The battery pack can explode in a fire. 

Summary of Contents for CT0584





















Reviews: