STEP4. Turn the assembled Frame of the Mixer on its side. Refer to diagram below. Take the
Motor and Gear Box Drive unit. Lining up the 5 exposed Bolts with the 5 Holes, predrilled in the
Back plate on the Gear Box Mounting Frame. Secure the Motor Gear Box, using the 5 Locking
Nuts provided once secure, turn the Frame onto its upward position.
STEP5. Fit the Motor Gear Box Cover shield (Ref 5) to the Gear Box Mounting Frame (Ref 9)
using the 2 small Nuts and Bolts provided.
STEP6. Mount the Cement Mixer Drum (Ref 1) onto Assembled Frame by locating the Gear
Box Shaft, through the Centre Hole in the Mixer Drum.
Use locating Point on the Gear Box Shaft to position correctly. Then take the large washer
(Ref12) and black spring washer (Ref 13) and place on the "T" Handle (Ref 14). Screw the "T"
Handle into the Gear Box Shaft. Secure tightly before proceeding.
Note: Mixing Blades Preassembled in Mixer Drum.
