SAFETY
IMPORTANT!
PLEASE READ THIS SECTION CAREFULLY
！
Your
Mixer
has been designed with safety in mind. However as with any type of machinery
some basic rules apply:
DO NOT
Place your hand or hands in or around any part of the
drum while it is operating!
DO NOT
Place any tools or instruments in or around the drum
while it is operating!
DO NOT
Operate the mixer on a surface that is not flat or is
uneven! Always operate the mixer on a level surface, if placed
on an incline the machine will fall over.
DO NOT
Clean, assemble or work on the unit while it is
plugged in!
DO NOT
Allow water to contact the motor or electrical
connections at any time!
DO NOT
Ignore the safety cut out switch. If your mixer
should stop during use it normally indicates a break in power supply, check and rectifies any
problem in power supply.
DO NOT
Set up or operate the Mixer in or around water puddles.
DO NOT
Leave Mixer unattended, whilst in operation!
DO NOT
Operate Mixer while under the influence of alcohol or drugs!
DO NOT
Start or stop the Mixer when there is material in the Mixer Drum. This will damage the
motor. Always make sure the Mixer Drum is Rotating when filling or discharging material.
DO NOT
Attempt to move Mixer when there is material in the Mixer Drum.
DO
Read all instructions before operating the Mixer.
DO
Keep Mixer clean. Wash down immediately after use. Any build up of cement and concrete
on your Mixer, will seriously affect the performance and reduce the life of the Mixer.
DO
Disconnect the Power supply before moving the Mixer.
DO
Keep all moving parts, lightly greased. (Wheels, Axles, Swivel Brackets, etc)
DO
Periodically check the Mixer for wear or damage.
DO
Wear protective safety wear. It is advised not to wear loose clothing when using Mixer.
