English - 21
English
Operation
Hot water
If your boiler is also equipped with a hot water supply, or
controls one, this hot water supply can be set to the ON, OFF or
AUTO mode as desired:
1. Make sure the display is in normal mode (refer to figure 3-2).
2. Press and hold the HOT WATER key. The display shows the
current hot water mode.
3. Turn the program knob to change the mode of the hot water
supply. Successively, the modes ON, OFF and AUTO will be
shown. Set the desired mode using the program knob.
4. Release the HOT WATER key.
In the AUTO mode, the hot water supply will be switched off
when the ECO mode in the clock program is set.
–
+
+
ON
OFF
AUTO
