NEFF U14M62 0GB Series, Instruction Manual

Page: 7 / 24

7
Notes
■
When you set a clock function, the time interval increases
when you set higher values (e.g. cooking time up to ‚ : ‹‹œ to
the minute, using ‚ : ‹‹œ
to the nearest 5 minutes).
■
For the Q minute minder, x cooking time, y end of
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal before it ends,
press the KJ clock function button.
■
Briefly press the KJ clock function button to select a clock
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
1.
Press and hold the KJ clock function button for 6 seconds.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
2.
Press the KJ clock function button briefly.
The clock display switches on.
Timer
1.
Press the KJ clock function button repeatedly until the KJ
and Q symbols light up.
2.
Set the duration using the rotary selector (e.g. † : ‹‹ minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1.
Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
x
symbols light up.
3.
Set the cooking time with the rotary selector
(e.g.
‚
:
„‹
hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Once the cooking time has elapsed, the bottom oven switches
off automatically.
1.
Turn the operating mode and temperature selector back to
the
Û
zero position.
2.
Press the
KJ
clock function button to exit the clock function.
End of operation
Automatic switch-off at a set time.
1.
Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
y
symbols light up.
3.
Set the end of operation using the rotary selector
(e.g.
‚ƒ
:
„‹
o'clock).
The setting is applied automatically. The clock is then
displayed again.
The bottom oven switches off automatically at the time set for
the end of operation.
1.
Turn the operating mode and temperature selector back to
the
Û
zero position.
2.
Press the
KJ
clock function button to exit the clock function.
Preset operation
The bottom oven switches on automatically and switches off at
the time preselected for the end of operation. To set this
function, combine the cooking time and end of operation clock
functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
Clock function Use
Q
Timer You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically.
x
Cooking time
Bottom oven
õ
: The oven switches off automatically after a set cooking time
(e.g.
‚
:
„‹
hours).
y
End of operation
Bottom oven õ : The oven switches off automatically at a set time (e.g.: ‚ƒ : „‹ ).
Preset operation
Bottom oven
õ
: The oven switches on and off automatically. Cooking time and end of
operation are combined.
3
Clock Sets the clock