en
Move function
16
u
Move function
Move func
tion
This function activates the entire flexible cooking zone,
which is divided into three cooking areas and which has
preset heat settings.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
This means that an item of cookware can be moved
during the cooking process to another cooking area
with another heat setting:
Preset heat settings:
Outer area = heat setting
Š
Middle area = heat setting
†
Inner area = heat setting
–
The preset heat settings can be changed separately for
each cooking area. You can find out how to change
these in the section on
Notes
■
If more than one item of cookware is detected on the
flexible cooking zone, the function is deactivated.
■
If the cookware is moved within the flexible cooking
zone or lifted up, the hob automatically starts
searching and the heat setting of the area in which
the vessel was detected is set.
■
You can find information on the size and positioning
of the cookware in the section on
Activation
1.
Select one of the two hotplates in the flexible
cooking zone.
2.
Touch the
|
symbol. The
v
indicator lights up. The
flexible cooking zone is activated as a single
hotplate.
The heat setting for the area on which the cookware
is located appears in the display for the outer
hotplate.
The function was activated.
Changing the heat setting
The heat settings for the individual cooking areas can
be changed during the cooking process. Set the
cookware down on the cooking area and change the
heat setting using the twist knob.
Notes
■
Only the heat setting in the area in which the
cookware is located is changed.
■
If the function is deactivated, the heat settings for the
three cooking areas are reset to the preset values.
Deactivating
Touch the
|
symbol. The
v
indicator goes out.
The function was deactivated.
Note:
If one of the cooking areas is set to
‹
, the
function deactivates after a few seconds.
Cooking areas
