NEFF T4.E10 Series, Instructions For Installation And Use Manual

Page: 28 / 52

28
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The hob must be turned off.
To activate: press and hold the
‚ symbol for approx. 4
seconds. The ‚ indicator lights up for 10 seconds. The hob is
locked.
To deactivate: press and hold the ‚ symbol for approx. 4
seconds. The lock is now deactivated.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š
.
All the hotplates have this function.
To activate
The hob must be switched on, but no hotplate should be
working.
1.
Select the required hotplate.
2.
Select the power level Š .
3.
Then press the + symbol.
The
˜
symbol lights up in the display. The powerboost
function has been activated.
Note:
If any hotplate is switched on when the Powerboost
function is working,
˜
and
Š
will flash on the hotplate display;
the power level
Š
will then be set. The Powerboost function will
be deactivated.
To deactivate
Select the hotplate and press the - symbol. The ˜ indicator will
disappear and the hotplate will return to the power level
Š
. The
Powerboost function has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
Turning off a hotplate automatically
Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
1.
Select the required power level.
2.
Press the 3 symbol. The x indicator of the hotplate lights
up.
‹‹
is displayed in the time program function display. To
select another hotplate, press the
3
symbol several times
until the x indicator for the desired hotplate lights up.
3.
Press the
+
or
-
symbol on the time program function. The
basic setting appears:
+
symbol: 30 minutes.
-
symbol: 10 minutes.
4.
Press the
+
or
-
symbol until the required cooking time
appears.
After a few seconds, the cooking time begins to count down.
Once the time has elapsed
The hotplate switches off. The beep sounds, and in the time
program function display
‹‹
appears for 10 seconds. The
x
indicator lights up on the hotplate display. Pressing the 3
symbol turns off the indicators and stops the beeping.
Changing or cancelling the time
Press the
3
symbol several times until the required
x
indicator lights up. Change the cooking time using the
+
or
-
symbols, or set to ‹‹ .
Notes
■
If a cooking time has been programmed for several
hotplates, it can be set to display all the time values. To do
this, press the 3 symbol several times until the x indicator
for the required hotplate lights up.
■
Any cooking time can be programmed for up to 99 minutes.