NEFF T..T.3 series, Instruction Manual

Page: 26 / 48

26
Consisting of two independent zones
The flexible zone can be used normally as two independent
hotplates.
How to activate
See “adjusting the hotplate“ section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
The hob must be switched on.
1.
Position the pan and using the Tipp control symbol, select
one of the two zones corresponding to the flexible zone.
2.
Press the ï symbol. The Ü indicators come on.
The flexible zone been activated.
Note:
The power level is displayed by one of the flexible zone
indicators or both, depending on the location and size of the
cookware.
Changing the power level
Select the flexible zone and change the power level using the
Tipp control.
To add more cookware
Select the flexible zone and then press the
ï
symbol. The new
pan will be detected and the previously selected power level
will be maintained.
Note:
If the pan on the hotplate that is switched on is moved or
removed, the hob will perform an automatic search and the
previously selected power level will be maintained.
To deactivate
Select the zone and press the ï symbol twice. To deactivate
the flexible zone, the ï symbol must be pressed twice within
two seconds.
Return to using two hotplates
Select one of the two hotplates of the flexible zone and set to ‹ .
Note:
When a hob is switched off and later switched on again,
the flexible zone will again be used as two hotplates.
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the
˜ symbol for approximately 3 seconds.
The
‚
indicator lights up for 10 seconds. The hob is locked.
To deactivate: press the ˜ symbol for approximately
3 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š
.
Restrictions when using
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the
˜
and
Š
symbols will flash on the display of the
selected hotplate; then the power level is automatically set
Š
.
Note:
The Powerboost function can be activated in the flexible
zone when used as a single hotplate. In this case, place the
pan in the centre as shown in the Flexible zone section.
To activate
1.
Select the hotplate using the Tipp control.
2.
Press the
˜
symbol.
The function has been turned on.
To turn off
1.
Select the hotplate using the Tipp control.
2.
Press the
˜
symbol.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
*URXS
*URXS
*URXS
*URXS