en
Fault, what to do?
36
Spray arms
Limescale and contaminants in the
rinsing water may block nozzles and
bearings on the spray arms
1:
and
1Z
.
1.
Check outlet nozzles on the spray
arms for blockages.
2.
Unscrew the upper spray arm
1:
(1) and remove downwards (2).
3.
Remove the lower spray arm
1Z
upwards.
4.
Clean spray arms under running
water.
5.
Re-engage or screw on spray arms.
3
Fault, what to do?
Fault, wh
at to do?
Experience has shown that you can
rectify most faults which occur in daily
operation yourself. This ensures that the
appliance is quickly available to you
again. In the following overview you can
find possible causes of malfunctions
and helpful information for rectifying
them.
Note:
If the appliance stops during
dishwashing or does not start for no
obvious reason, first run the Abort
programme function (Reset)
:
Warning
Improper
repairs or use of non-original spare
parts may cause considerable damage
and put the user at considerable risk!
Always have repairs carried out by
technicians. If a component has to be
replaced, always use original spare
parts.
Error message
Some faults are indicated at the top of
the display window
@
and on the front
display *
):
and possible remedies
are offered (for example Filter system
soiled (E22) -->Clean filters).
* depending on the features of your
dishwasher
Summary of Contents for S717P80X1E
Page 1: ...Q en Instruction manual Dishwasher S...
Page 2: ...5HVHW VHF 6HWXS VHF...
