en
17
Interrupting the programme
Set the main switch
5
to OFF.
Indicator lights extinguish.
If the hot water was switched ON or the
appliance has already heated up and
then the appliance door opened, leave
the door ajar for several minutes and
then close.
Otherwise, the appliance door may fly
open due to expansion.
In order to resume the programme, set
the main switch to ON again.
Changing the programme
Switch off the main switch
5
.
Set the programme selector
1
to
the new programme (rotate in
a clockwise direction only!).
Switch on the main switch
5
again.
Check whether the detergent dispenser is
still closed. Otherwise, refill with detergent.
Note
If the power supply is
disconnected while the appliance
is operating, e.g. by switching off
the appliance or due to a power
failure, all settings remain stored.
Operation continues automatically
as soon as the power supply is
restored.
Maintenance and care
You can help prevent faults by checking
and maintaining your appliance regularly.
This will save time and reduce problems.
Therefore you should occasionally
examine the inside of your dishwasher.
Overall condition of the
appliance
Check the rinsing compartment for grease
and limescale deposits.
If you find any deposits:
Fill the detergent dispenser with
detergent. Start the empty appliance
with the programme which has the
highest rinsing temperature.
Clean the door seal:
Wipe the door seal regularly with
a damp cloth and remove any deposits.
Dishwasher salt
Check the LOW SALT indicator
24
. Top
up with salt, if required.
Rinse-aid
Check the level of liquid in the rinse-aid
container
30
. Top up with rinse-aid, if
required.
