Installation instructions
en
21
10.
Screw the rails onto the bottom of the unit.
11. Note:
If an appliance with the dimension 90 cm is
installed in a unit with a width of 90 cm, skip the
next two installation steps and follow the instructions
in the additional accessory pack.
Screw in the screw from below and tighten the nut.
12.
Align the appliance to the hob and tension it
against the worktop .
13.
Insert the drip tray and snap it into place.
14.
Plug the cables into the fan box.
15.
Carefully insert the glass pane as far as it will go
into the guides.
16.
Connect the appliance to the power supply.
a
The glass panel moves downwards and the appli-
ance closes.
17.
Insert the grease filters.
→
