background image

en

    Important safety information

12

INSTALLATION INSTRUCTIONS

Installation instructions

This appliance is fitted to the kitchen ceiling or a 

sturdy suspended ceiling.

The surfaces of the appliance are sensitive. Avoid 

damaging them during installation. 

(

Important safety 

information

Important

 safety i

nformatio

n

Read these instructions carefully. Only then 

will you be able to operate your appliance 

safely and correctly. Retain the instruction 

manual and installation instructions for future 

use or for subsequent owners.
Check the appliance for damage after 

unpacking it. Do not connect the appliance if it 

has been damaged in transport.
The appliance can only be used safely if it is 

correctly installed according to the safety 

instructions. The installer is responsible for 

ensuring that the appliance works perfectly at 

its installation location.
Only a licensed professional may connect 

appliances without plugs. Damage caused by 

incorrect connection is not covered under 

warranty.

Caution!

Damage to the appliance

The surfaces of the appliance are sensitive. 

Avoid damaging them during installation.
For the installation, observe the currently valid 

building regulations and the regulations of the 

local electricity and gas suppliers.

:

Warning

Risk of fire!

Fatty deposits in the grease filter may catch 

fire. The specified safety clearances must be 

complied with in order to prevent a build-up of 

heat. Refer to the information provided for your 

cooker. If gas and electric hobs are being 

operated together, the largest specified 

clearance applies.

:

Warning

Risk of fire!

Grease deposits in the grease filter may catch 

fire. Never work with naked flames close to the 

appliance (e.g. flambéing). Do not install the 

appliance near a heat-producing appliance for 

solid fuel (e.g. wood or coal) unless a closed, 

non-removable cover is available. There must 

be no flying sparks.

[

[

[

[

[

[

PP

PP

!

!

Summary of Contents for I38KHV2S0





















Reviews: