NEFF HLAWD53N0B, Instruction Manual

Page: 9 / 24

Before using for the first time
en
9
■
Condensation may appear on the door window,
interior walls and floor. This is normal and does not
adversely affect microwave operation. Wipe away the
condensation after cooking.
Changing the signal duration
You will hear a signal when the appliance is switched
off. You can change the duration of the acoustic signal.
Press the Start button for approx. 6 seconds.
The new signal duration is adopted.
The clock reappears.
The following are possible:
Short signal duration - 3 tones
Long signal duration - 30 tones.
K
Before using for the
first time
Before using for the first time
This section tells you what you need to do before using
your microwave to prepare food for the first time. Read
the section entitled "Safety information" beforehand.
~
"Important safety information" on page 4
Before you can use your new appliance, you will need
to put the turntable in place correctly. You must also
clean the cooking compartment and accessories.
Cleaning the cooking compartment and
putting the turntable in place
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
How to put the turntable in place
1.
Place the roller ring
a
into the recess in the cooking
compartment.
2.
Make sure that the turntable
b
engages in the drive
c
in the centre of the cooking compartment floor.
Note:
Never use the appliance without the turntable.
Make sure that it is properly engaged.The turntable can
turn clockwise or anti-clockwise.
Setting the clock
When the appliance is first connected or after a power
cut, three zeros will appear in the display panel.
1.
Press the
0
button.
‚ƒ : ‹‹
œ
appears in the display and the indicator
lamp above the 0 button lights up.
2.
Set the clock using the rotary selector.
3.
Press the
0
button again.
The current time is set.
Hide the clock
Press the 0 button and then press "Stop".
The display is dark.
Resetting the clock
Press the 0 button.
"12:00" appears in the display. Make settings as
detailed in points 2 and 3.
Change the clock, e.g. from summer to winter time
Set as described in point 1 to 3.
E
D
F