background image

en 

Cleaning and servicing

10

8.4 Cleaning the magnetic mounting bracket

ATTENTION!

Magnetic mounting brackets may come loose due to

improper cleaning.

Do not use any sharp or pointed objects for the

cleaning.

Do not use cleaning fluids that contain adhesives.

1.

Observe the information regarding the cleaning

agents. 

→ 

"Cleaning products", Page 9

2.

Clean using a damp sponge cloth and hot soapy

water.

3.

Dry with a soft cloth.

8.5 Removing the grease filter

WARNING ‒ Risk of injury!

Risk of injury when opening and closing the hinges.

Keep your hands away from the hinges.

The filter cover may swing out.

Open the filter cover slowly.

Take hold of the filter cover after opening until it no

longer swings out.

Close the filter cover slowly.

1.

Take hold of the filter cover in the centre and open it

fully.

2.

ATTENTION!

Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.

Open the lock on the grease filter and fold down the

grease filter.

3.

Remove the grease filters from the holders.

To prevent grease from dripping, hold the grease fil-

ter horizontally.

8.6 Fitting the grease filters

1.

ATTENTION!

Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.

Note: 

Note the correct position of the grease filter.

Insert the grease filter.

2.

The lock on the grease filter clicks into place.

3.

If the grease filter has been inserted incorrectly,

carefully push the lock forwards, remove the grease

filter and insert it correctly.

8.7 Cleaning grease filters manually

The grease filters filter the grease from the cooking va-

pour. Regularly cleaned grease filters guarantee a high

level of grease removal. We recommend cleaning the

grease filters every two months.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

Requirement:

 The grease filters have been removed. 

→ 

"Removing the grease filter", Page 10

1.

Observe the information regarding the cleaning

agents. 

→ 

"Cleaning products", Page 9

2.

Soak the grease filter in hot soapy water.

Use special grease solvent for stubborn dirt. You

can obtain grease solvents from customer service

or the online shop.

3.

Use a brush to clean the grease filters.

4.

Rinse the grease filters thoroughly.

5.

Allow the grease filters to drain.

8.8 Cleaning grease filters in the

dishwasher

The grease filters filter the grease from the cooking va-

pour. Regularly cleaned grease filters guarantee a high

level of grease removal. We recommend cleaning the

grease filters every two months.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

Summary of Contents for D95FQ Series





















Reviews: