NEFF C88FT38 0B Series, Instruction Manual

Page: 16 / 68

en
Operating the appliance
16
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
To switch the appliance on or off, touch the
#
touch
button.
After the appliance has switched off, the display shows
whether the residual heat in the cooking compartment
is high or low.
Notes
■
Certain indicators and instructions (e.g. about
residual heat in the cooking compartment) remain
visible on the display even when the appliance is
switched off.
■
After the appliance has completed an operation, you
will hear the cooling fan continuing to run until the
cooking compartment is cooled as much as
possible.
■
Switch off your appliance when you do not need to
use it. If no settings are made for a long time, the
appliance switches off automatically.
Setting and starting the appliance operation
Example:
‚
CircoTherm hot air at 170 °C
1.
Touch the
#
touch button to switch on the
appliance.
You go directly to the
¢
Types of heating menu.
2.
Swipe to the left or right to select the type of heating.
3.
Touch the bottom line.
4.
Swipe to the left or right to select the temperature.
5.
Touch the
#
touch button to start the appliance
operation.
The heat-up indicator bar and the run time appear in
the display.
Note:
If you want to go directly to the
0
main menu
when you switch on the appliance, you can find
instructions on how to do this in the Basic settings
chapter under "Operation after switching on".
Default values
The appliance suggests a temperature or setting for
each type of heating. You can accept this value or
change it in the appropriate area.
Heating bar
As soon as a type of heating has started, the heating
bar appears on the display.The heating bar shows the
temperature increase in the cooking compartment.
Run time
When a type of heating has been started, the run time is
displayed. The run time counts upwards during the
operation. You can therefore check how long the
operation has already been running.
Displaying the current temperature
To show the current temperature on the display, press
the
!
touch button.
The current temperature is shown briefly only when
heating up.
Further information
If the
!
touch button lights up, information can be
displayed. Touch the
!
touch button to do this. The
information is displayed for a few seconds.
Changing or cancelling the appliance
operation
Changing the appliance operation
1.
Use the
#
button to stop the operation.
2.
Tap the line for the setting that should be changed.
3.
Swipe to the left or right to change the setting.
4.
Use the
#
touch button to start the changed
operation.
Notes
■
The cooling fan may continue to run while an
operation is interrupted.
■
After a temperature change, the paused running time
continues to count. After a change in the type of
heating, the running time starts again from zero.
Cancelling the appliance operation
Press and hold the
#
touch button until the appliance
operation is cancelled.
Note:
Operating modes such as the cleaning function
cannot be cancelled.
Display Temperature
Residual heat high above 120 °C
Residual heat low between 60 °C und 120 °C
ƒ&
&LUFR7KHUP
ƒ&
ƒ& ƒ&
ƒ& ƒ&
&LUFR7KHUP