NEFF C24MS71 0B Series, User Manual And Installation Instructions

Page: 14 / 52

en
Microwave
14
8.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Temperature
Residual heat high Over 120 °C
Residual heat low Between 60 and 120 °C
8.4 Setting the type of heating and
temperature
1.
Press to switch the appliance on.
2. Press "Types of heating".
3.
Scroll through the types of heating using or ⁠.
4. Press the type of heating that you want to use.
5.
Press "Temperature".
6. Use or to select the temperature.
7.
Press to confirm the setting.
Also available to select:
– Rapid heating →
Page 20
– Cooking time →
Page 17
– Ready at → Page 17
– Microwave → Page 16
– Information →
Page 14
8. Press to start the operation.
Note:
When you are preheating the appliance, the
optimal time to place your food in the cooking com-
partment is as soon as the heat-up indicator is filled.
a
The cooking time appears on the display.
a
The heat-up indicator bar visualises the rising tem-
perature.
9.
When the food is ready, use to switch the appli-
ance off.
8.5 Changing the temperature
You can also change the temperature or level once you
have started the appliance.
1. Press "Temperature".
2. Use ⁠ or ⁠ to change the temperature.
3. Press to confirm the setting.
a
The temperature is changed.
8.6 Changing the type of heating
If you switch to a different type of heating, the appli-
ance will reset all the settings.
1. Press to pause operation.
2. Press to switch to the types of heating.
3. Scroll through the types of heating using or ⁠.
4. Press the type of heating that you want to use.
5.
Adjust the temperature or level, if required.
6. Press to start the operation.
8.7 Pausing operation
1. Press ⁠.
2. Press again to resume operation.
8.8 Displaying information
Note: In most cases, you can call up information about
the function that you have just started.
1. Press "Information".
a
The information will be displayed for a few seconds.
2. Press to close the information.
8.9 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
1.
Change the "Lighting" basic setting to "Always off".
→ "Basic settings", Page 20
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2. Set the required type of heating.
→ "Setting the type of heating and temperature",
Page 14
3. Set the required cooking time depending on the
type of heating.
→ "Cooking time", Page 17
4. Use "Ready at" to set the time at which the opera-
tion should end.
→ "Delayed start/"Ready at" time", Page 17
5.
Place the food in the cooking compartment before
the appliance starts to heat.
6.
Press to start the operation.
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7. When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note: If necessary, change the basic setting for the
lighting again.
9 Microwave
You can use the microwave to cook, heat up, bake or
defrost food very quickly.
The microwave can be used on its own, or in combina-
tion with a different function.
9.1 Cookware and accessories with
microwave
To heat food evenly and avoid damaging your appli-
ance, it is important to only use the right cookware and
accessories.
Follow the cookware manufacturer's instructions.
Unless otherwise specified, place the cookware and
accessory on level 1.