NEFF C24MS71 0B Series, User Manual And Installation Instructions

Page: 16 / 52

en
Ventilation function "Crisp Finish"
16
9.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment if condensation has formed.
→ "Drying", Page 27
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→
"Basic settings", Page 20
Changing the microwave output
1.
Press ⁠.
2. Press the required microwave output setting.
3.
Press to confirm the change.
9.3 Added microwave
Adding the microwave to a type of heating or function
reduces the cooking time.
Types of heating and functions for added
microwave
You can switch on added microwave for the following
types of heating and functions:
¡
"Circo Therm hot air"
¡
"Top/bottom heat"
¡
"Circo-roasting"
¡
"Bread baking setting"
¡
"Full-surface grill"
¡
"Centre-area grill"
¡
→ "Dishes", Page 18
¡
→ "Ventilation function 'Crisp Finish'", Page 16
Possible microwave output settings combined with a
type of heating or function include:
¡
"90 W"
¡
"180 W"
¡
"360 W"
Setting added microwave
Note:
Note the correct way to operate the microwave:
¡
→
"Safety", Page 2
¡
→ "Preventing material damage", Page 6
¡
→ "Microwave power settings", Page 11
¡
→
"Cookware and accessories with microwave",
Page 14
Requirement: Observe the information about the re-
spective type of heating or function.
1. Set a suitable type of heating or function.
→
"Types of heating and functions for added mi-
crowave", Page 16
2. Set the required temperature.
3. Press "Microwave".
4. Press the required microwave output setting:
– "90 W"
– "180 W"
– "360 W"
5. Press to confirm the setting.
6. Press "Cooking time".
7. Use ⁠ or ⁠ to select the cooking time.
8. Press to confirm the setting.
9. Press to start operation with added microwave.
a
The appliance starts to heat and the time counts
down.
a
When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
10. Press any button to end the signal tone.
Cancelling added microwave
1. Press ⁠.
2. Press "Microwave".
3. Press "Off".
4. Press to confirm the setting.
a
The operation continues without added microwave.
10 Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish" extracts moisture
from the cooking compartment so that your meal will
be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
10.1 Types of heating for the ventilation
function
Only certain types of heating are suitable for the ventil-
ation function.
You can activate the ventilation function for the
following types of heating:
¡
"Circo Therm hot air"
¡
"Top/bottom heat"
¡
"Circo-roasting"
¡
"Pizza setting"
¡
"Bread baking setting"
10.2 Activating the ventilation function
You can activate the ventilation function at any time,
even once the operation has started.
1.
Press to switch the appliance on.
2. Set a suitable type of heating.
→ "Types of heating for the ventilation function",
Page 16
3. Set the required temperature.
4.
Press "Crisp Finish" ⁠.
5. Press to start operation with the ventilation func-
tion.
6. When the food is ready, use to switch the appli-
ance off.
Note: Amplified fan noises can be heard while the
appliance is in operation.
10.3 Cancelling the ventilation function
1. Press ⁠.
2.
Press "Crisp Finish" ⁠.
a
The operation continues without the ventilation func-
tion.