en
Trouble shooting
32
--------
Maximum operating time exceeded
Your appliance ends the operation automatically when
no cooking time is set and the setting has not been
changed for a long time.
The actual cooking time until the operation is stopped
automatically varies according to the selected settings.
The appliance display indicates that the operation will
end automatically. Afterwards, the operation is stopped.
To use the appliance again, switch it off beforehand.
Then switch the appliance on again and set the
required operation.
Replacing the bulb in the top of the cooking
compartment
If the cooking compartment light bulb fails, it must be
replaced. Heat-resistant, 40 watt, 230 V halogen bulbs
are available from the after-sales service or specialist
retailers.
When handling the halogen bulb, use a dry cloth. This
will increase the service life of the bulb. Only use these
bulbs.
:
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
1.
Place a tea towel in the cold cooking compartment
to prevent damage.
2.
Turn the glass cover anti-clockwise to remove it
(figure
!
).
3.
Pull out the bulb – do not turn it (figure
"
).
Insert the new bulb, making sure that the pins are in
the correct position. Push the bulb in firmly.
4.
Screw the glass cover back on.
Depending on the appliance model, the glass cover
may have a sealing ring. If the glass cover has a
sealing ring, put it back in place before screwing the
cover back on.
5.
Remove the tea towel and switch on the circuit
breaker.
Glass cover
If the glass cover of the halogen bulb is damaged, it
must be replaced. You can obtain a new glass cover
from the after-sales service. Please specify the E
number and FD number of your appliance.
"D" or "E" appears on the display, e.g.
D0111 or E0111
Technical problem
Switch the appliance off and on again
If the message appears again, call the after-sales ser-
vice. Quote the exact error message
Home Connect does not work cor-
rectly.
Go to www.home-connect.com
2
1
Summary of Contents for B57CS24H0B
Page 1: ... en INSTRUCTION MANUAL BUILT IN OVEN B57CS24H0B ...
Page 2: ......
Page 50: ...6 ...
Page 51: ...6 ...