NEFF B48FT74 0B Series, Instruction Manual

Page: 32 / 60

en
Appliance door
32
2.
Open the appliance door a little (Fig.
%
).
3.
Using a coin, fully turn both the left- and right-hand
locks on the inside of the appliance at the bottom
(Fig.
&
).
Left lock: Clockwise
Right lock: Anti-clockwise
4.
Close the appliance door a little, until you feel the
locks engage.
The door can no longer be closed.
5.
Lift the door handle slightly on the left- and right-
hand side using both thumbs
‚
and pull the
appliance door out upwards
ƒ
(Fig.
'
).
6.
Lay the appliance door on an even, soft and clean
surface.
Fitting the appliance door
1.
Fit the appliance door (Fig.
!
).
2.
Fit the appliance door in the left and right-hand guide
rollers simultaneously (Fig.
"
).
Ensure that the appliance door does not tilt unevenly
and that it is properly fitted in place.
3.
Turn the door handle upwards slightly
‚
so that the
appliance door slides downwards fully
ƒ
(Fig.
#
).
4.
Use a coin to release both locks on the appliance
door (Fig.
$
).
Left lock: Anti-clockwise
Right lock: Clockwise
5.
Open the appliance door a little wider and then close
it.
:
Warning
Risk of injury from hinge locks which have not
been properly closed!
The appliance door may detach itself. You may be
injured and the appliance door damaged. After
refitting the door, always close the left- and right-
hand hinge locks.
6.
Close the left- and right-hand hinge locks (Fig.
%
).
To do this, push the hinge lock downwards on both
sides with a screwdriver (Fig.
&
).
Removing and installing the door panels
For cleaning, you can remove the glass panels from the
appliance door.
To do this, the appliance door must be removed
beforehand (see section "Removing and fitting the
appliance door").
:
Warning – Risk of injury!
The appliance must not be used again until the door
panels and appliance door have been correctly fitted.
Removing
Note:
Lay the removed glass panels on an even, soft
and clean surface.
1.
Remove the appliance door.
2.
Lay the appliance door with the front side facing
down on an even, soft and clean surface.
3.
Push on the left- and right-hand side on the outside
of the appliance door until the inner glass panel is
released on both sides (Fig.
!
).
4.
Carefully lift the inner glass panel and remove it in
the direction of the arrow (Fig.
"
).
II
II
I
D
E
2I 1I
II I
D
E
I