en
Steam
14
3.
Lift the water tank and remove it from the water tank
recess .
4.
Press down on the water tank lid along the seal to
prevent water from leaking out of the water tank.
5.
Fill the water tank with water up to the "max"
mark.
6.
Slide the full water tank back into the recess .
When doing so, make sure that the water tank clicks
into place in the retainers .
7.
Slowly slide the control panel downwards and then
push it away from you until it is closed completely.
8.2 Refilling the water tank
When "Fill water tank" appears on the display, you
must refill the water tank.
Notes
¡
Steam, Dough proving, Defrost and Reheat func-
tions: If you do not refill the water tank, the appli-
ance will stop. Refill the water tank.
¡
Steam-assisted heating: If you do not refill the water
tank, the appliance will continue to heat but without
injecting steam into the cooking compartment.
1.
Open the control panel.
2.
Remove and refill the water tank.
3.
Insert the full water tank and close the control panel.
8.3 Steam heating functions
Your appliance has several steam heating functions:
¡
Steam
¡
Dough proving
¡
Sous-vide
¡
Defrost
¡
Reheat
Steam
With the "Steam" heating function, the food is envel-
oped by hot steam, which helps to retain the nutrients.
This cooking method also helps to retain the shape,
colour and typical flavour of the food.
Configuring the Steam heating function
1.
Fill the water tank.
"Filling the water tank", Page 13
2.
Press to switch the appliance on.
3.
Press .
4.
Use the or button to set "Steam" .
5.
Use the button to navigate to the next row.
6.
Use the or button to select the required temperat-
ure.
7.
Use the button to navigate to the next row.
8.
Use the or button to select the required cooking
time.
9.
Press to start the steaming process.
"Cancelling operation", Page 13
a
If the water tank runs dry during the steaming pro-
cess, steaming will be paused.
"Refilling the water tank", Page 14
a
Once the cooking time has elapsed, an audible sig-
nal will sound and the appliance will stop heating.
"Switching off the appliance", Page 12
10.
Press any button to end the audible signal.
11.
Empty the water tank and dry the cooking compart-
ment.
"After every steam operation", Page 16
Dough proving
Yeast dough will prove considerably more quickly us-
ing the "Dough proving" heating function than at room
temperature, and it will not dry out.
Configuring the Dough proving heating function
Requirement:
The cooking compartment must have
cooled down completely.
1.
Fill the water tank.
"Filling the water tank", Page 13
2.
Press to switch the appliance on.
3.
Use the or button to set "Dough proving" .
4.
Use the button to navigate to the next row.
5.
If necessary, use the button to set setting 2.
6.
Use the button to navigate to the next row.
7.
Use the or button to select the required proving
time.
8.
Press to start the dough proving process.
"Cancelling operation", Page 13
a
If the water tank runs dry during the dough proving
process, dough proving will be paused.
"Refilling the water tank", Page 14
a
Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
Summary of Contents for B47FS26G0
Page 1: ...Oven en User manual and installation instructions B47FS26G0...
Page 53: ......
Page 54: ......
Page 55: ......
