30
Assembly Instructions
For the installer
and kitchen expert!
Important installation
Properly dispose of
packaging materials.
notes
Do not use
oven door handle
for
transporting or handling the unit during
installation.
An earthed socket is required for the power
supply.
The built-in oven is supplied with a connecting
cable.
WARNING:
Connection and first start of the
appliance may only be performed by an
authorised specialist.
Connection must be made using an
H 0 5 R R - F 3 G 1,5
mains connection cable.
Rated consumption, rated voltage and type
no. of the appliance:
See appliance nameplate behind the oven door
to the left beneath the side edge of the oven.
The unit's nameplate is located at on the
sidewall of the unit.
Electrical safety
of the appliance can be ensured
only if the equipment earth in the building
installation has been installed according to
regulations.
On the installation side a separating device shall
be provided. Any switch with a contact gap
The connection diagramm
is
exceeding 3 mm may be considered a separating
located on the rear panel of the
device. Other examples are LS switches, fuses
appliance.
and contactors.
In the case of repairs
interrupt all power
connections to the unit.
The properly installed appliance must be covered
on all sides in such a fashion that not even
components with rough insulation are exposed to
the touch.
The cover must be removable with tools only.
220-240V
~
L
N