NEFF B 15P42.0 GB, Instruction Manual, Page: 8 / 28

8
Current temperature
Press the ± info button. The current temperature appears for
3 seconds.
Note:
The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the
Û
position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1.
Press and hold the ± info button for 3 seconds to go to
the basic settings menu.
In the temperature display,
™‚‹ appears.
2.
Press the
±
info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g.
™„ƒ
).
3.
Using the temperature selector, set the required basic setting
within a submenu (e.g.
™„„
).
4.
Press and hold the
±
info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
‹‹‹ flashes in the temperature display. Appliance operation is
interrupted.
Turn the operating mode selector to the
Û position to
deactivate it.
Electronic clock
In this section, you can read about
■
how to set the timer
■
how to switch your appliance off automatically (cooking time
and end of operation)
■
how to switch your appliance on and off automatically (preset
operation)
■
how to set the time
■
find out how to activate rapid heat up
Clock display
Temperature
display
Meaning
•
Residual heat high (above 120 °C)
œ
Residual heat low (between
60 °C and 120 °C)
$ %
Basic settings menu
Submenu
Basic setting Setting
symbol
Childproof lock Appliance controls
unlocked
™‚‹
Appliance controls locked
™‚‚
Appliance controls
permanent lock
™ƒ‚
Audible signal Audible signal off
™‚‹
Audible signal 30 seconds
™„‚
Audible signal 2 minutes
™„ƒ
Audible signal 10 minutes
™„„
&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU
Clock function Use
Q
Timer You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
x
Cooking time The appliances switches off automatically after a cooking time setting has elapsed
(e.g.
‚
:
„‹
hours)
y
End of operation The appliance switches off automatically at a set time (e.g.
‚ƒ
:
„‹
)