07
[BULB] shooting mode
BULB
Delay shooing mode
Delay parameter setting:
BULB
1.
2.
3.
1. Ensure the camera in [BULB] mode
2. Press transmitter in [BULB] mode, the screen will display
[BULB] (Same as picture)
3. Half press the shooting button, blue lighting will be on and
the camera is in zooming.
4. Full press the shooting button, red lighting will flicker and start to work, the product
will be on output the signal and in BULB shooing mode.
5. Press the shooting release button again, the remote will be stopped the signal
mode, complete the BULB shooting mode.
1. Press the transmitter[ ]button, the screen will display
[ ]camera is in delay shooting mode.(Left picture)
2. Press the [S/L] button, product is in delay shooting mode, the
shooting icon will flicker, press the number [+] or number [-] and set
the delay interval time (1-59 seconds) as (Picture A).
3. Turn left button[ ] into the setting of delay shooting mode,
through [+] or [-] setting the shooting picture number (1-99), see left
(Picture B)
4. After the parameter setting, press the button[S/L] to save it and exit.
Delay shooting mode operation
Half press the shooting release button, the blue lighting is on and the camera is in
zooming state.
Full press the shooting release button, the remote control is in count down, red signal
flicker and into the delay shooting state.
End of count down mode, the remote control will set the shooting picture number,
each seconds will output the signal to control the camera.
