Fix the(NW-870RX)
Set the communication channels
Receiver (RX) to connect the camera
Set transmitter (TX) channels
Set the receiver (RX) communication channels
05
Support install the receiver in the hot-shoe, bracket and tripod and so on.
１
２
３
BULB
CH+
CH-
1. Put the receiver screw on
the camera hot shoe(Picture1)
2. Fixed the receiver in
camera plate(Picture2)
3. Fixed the receiver in
tripod(Picture3)
Please ensure the transmitter (TX) and Receiver (RX) on same channels, support
set 32 channels.
1. Press 2 second of power and press [CH]button, the
number of channels icon will flicking
2. Press [+] or [-] to adjust the channels number.
3. Press the button[S/L]again to keep the current channels
number.
＊ ｉｆ ｔｈｅ ｔｒａｎｓｍｉｔｔｅｒ ｗｏｒｋ ａｓ ｗｉｒｅｄ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｗｏｎ’ｔ ｎｅｅｄ ａｄｊｕｓｔ ｔｈｅ ｐａｒａｍｅｔｅｒ ｓｅｔｔｉｎｇ．
1. Press 2 seconds power button
2. Press [CH+] or [CH-] button, the channels number icon will
flicker.
3. Press [CH+] or [CH-] to adjust the channels
4. Both press [CH+] or [CH-] or not operation after 6seconds,
keep it and back to channels setting.
1. Ensure the receiver and camera is power off, first insert connect cable to camera
